(Source: Metal Gang)
Wuxi Besent Materials Technology Co., Ltd. is located in Shengdi Industrial Park, Hongxiang Road, Xinwu District, Wuxi City, Jiangsu Province. It focuses on the research and development, production and sales of new functional materials, mainly the research and development, production and sales of new casting materials. The company is determined to revitalize the rise of China, independently develops new products, replaces imported products from abroad, and provides high-quality services to foundry companies. At present, our company's main products are casting release agent/cleaning agent, sand core adhesive, foam ceramic filter and other raw and auxiliary materials for casting.
The company cooperates with many national colleges and universities to establish good cooperative relationships, jointly develop research and development, strive to align with foreign-funded enterprises, strive to make better products, and seek benefits for foundry enterprises.
Hot core box mold release agent
25KGPlastic barrel
Hot coreboxSpecial mold release agent, milky white liquid.
Features:
1,Water-based mold release agent, environmentally friendly product, odorless.
2,Many demolding times
3mold surface area scalefew(Relative to dimethyl silicone oil,Self-hardened sand release agent),Few times of mold cleaning.
Packaging and storage:During storage and transportation, you should pay attention to sealing to avoid fire and heat sources. You should store them in a ventilated and cool place for half a year. You should wear necessary protective supplies during use.
Hot core box cleaning agent
Hot core box cleaning agent (Direct injection type)
1. Properties and uses of hot core box mold cleaning agent:
Hot core box mold cleaning agentIt is a special cleaner for high-quality molds. Any serious mold dirt is completely removed instantly, making it easy to use. Use this product to clean the mold without damage to the mold and can extend the service life of the mold.reduce the maintenance costs of enterprise molds and improve the efficiency of mold processing.
2. Advantages:
The high-temperature mold is directly cleaned to completely remove dirt in an instant, without shutting down the machine, and will never affect production. The mold after descaling is clean and bright, which can improve product quality and productioneffectRate.
3. How to use:
Hot mold cleaning method: Please use a small amountCleaning agentApply or pour onto a high temperature mold and letHot core box mold cleaning agentReaction to mold dirt1minuteabout,The dirt will automatically soften and leave the mold, and thenBefore the foam dissipates,Rinse the mold surface with clean water(You can also use a wire brush to brush the dirt off),The mold is clean and bright as new,RememberMust be on the moldHot core box mold cleaning agentRinse with clean water before it is driedOr brush it downOtherwise, the dirt that freely softens the mold will stick back to the mold surface.resulting in the inability to clean up.The temperature of the mold during cleaningabout150-170℃.
4. Things to note:
1. This product is an alkaline solution. Please wear glue gloves during operation.
2. If your hands or skin gets stuck in the solution, rinse with a lot of running water.
3. Because it is an alkaline substance,Aluminum moldNot available.
4,For those with special surface treatmentmoldThe device needs to be tested before use.
V. Packaging:25KilogramplasticBarrel.
Hot core box cleaning agent (soaking type)
Hot core box cleaning agentIt is specially used to clean the residual mold release agent and coated sand (commonly known as carbon deposit) on the hot core box mold.
How to operate:
1.If carbon deposits are severe, the hot core box cleaning agent should be poured into the cleaning tank (the material is carbon steel and plastic). After the hot core box mold is cooled naturally, it will be taken out from the core injection machine and completely soaked in the hot core box cleaning agent. Soaking time approximatelytwenty fourTake it out for about an hour and wipe it clean with a cleaning cloth.
2.If there is still carbon deposits that have not been cleaned after wiping, you can continue to soak until the carbon deposits are completely removed.
Notes:
1Try to avoid long-term contact with copper and aluminum. If it is in contact, clean it up in time..
2,OperatorDuring useWear glue gloves and protective glasses. If accidentally sprinkled on your body or eyes, rinse it with clean water in time.
3store it in a cool, ventilated and dry warehouse, away from fire and heat sources, and avoid storage at the same time as strong oxidants and reducing agents.
Cleaning effect comparison chart
